If you have an oscilloscope you can connect it and see the output. I have a K3 which has the modified IF with higher output. I have a 5 MHz (-3 dB) oscilloscope in my shack for monitoring. Even at 8.215 MHz it indicates up to +/- 50 mV in the 40 m band (no ATT, no PRE). In other bands it is lower, like about +/- 5mV (no ATT, no PRE) in the 80 m band. Due to the bandwidth limitation of my oscilloscope, I guess these values should be doubled or so to find the true values.
srife wrote: > > I am trying to verify the output at the IF OUT jack on the back of the > K3. > ----- Sverre, LA3ZA K2 #2198, K3 #3391 http://www.qslnet.de/member/la3za/K2/mod.html LA3ZA Unofficial Guide to K2 modifications -- View this message in context: http://n2.nabble.com/IF-output-tp4294395p4294893.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
