Apparently, from what has been previously discussed here, not all the 8-pole filters are "no offset" in practice and some models in particular might benefit from offset adjustments. And one should not forget that these filters are roofers. Unless money is no object, I would say to leave the stock filter in place and add another, narrower SSB filter. As to what its BW should be, there have been scads of opinions expressed on that subject, as well.
Garry, NI6T On 4/12/2010 5:05 AM, David Ferrington, M0XDF wrote: > Since you seem to favour 8 pole, I'd say do it. You should be able to get a > rebate on the 2.8kHz against the 2.7kHz. > Also, if you are going to get the KRX3, it's simple to align the 8 pole > filters - otherwise you need to tell Elecraft what the offset of your 2.7kHz > is > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
