>- don't tighten the screws too hard when reinserting the drawer, some >users had stability problems with G3 upgrade cards squeezed against other >components (the 6400's case is much crowded)
Humm... interesting tidbit. I have a G3 card for my 6500 that I was never able to get to work with it. Either the machine booted and the card wasn't seen, or the machine hung at the start of boot. I know the card is good as it works fine in a 4400. Since the 6400 and 6500 are the same motherboard and case designs, I wonder if I simply was having a problem with the card being knocked loose from pressure in the case. Of course, it doesn't matter too much now... I moved to a 9600 a few weeks ago, so my G3 card will be headed for permanent installation into a 4400 shortly... but it might be interesting to give it a whirl in the 6500 again but not screw the board back into place before trying to boot it. -chris <http://www.mythtech.net> ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
