It's a bug. I've tried to fix it some time ago but with no success. regards, Michael
Michael Haberler pisze: > I am puzzled by the behaviour of M61 (or unsure what it actually is supposed > to do). > > If I run say emc axis_mm.ini in configs/sim, turn on/home and in MDI: > > - execute T3M6: > halui.tool.number and iocontrol.0.tool-number both are 3 > Axis shows 'Tool 3' in status line > parameter #5400 returns 3.0 > > looks good so far. > > - execute 'M61 Q2' which is supposed to 'set the tool number' > halui.tool.number and iocontrol.0.tool-number both are 2 > > BUT: Axis still shows Tool 3 (!), and #5400 still is 3 (!) > > is that intentional, or a bug? I assume Axis should display 'Tool 2' and > #5400 become 2? > > > tried both on master and 2.4.6, identical results > > -Michael > > > ------------------------------------------------------------------------------ > Enable your software for Intel(R) Active Management Technology to meet the > growing manageability and security demands of your customers. Businesses > are taking advantage of Intel(R) vPro (TM) technology - will your software > be a part of the solution? Download the Intel(R) Manageability Checker > today! http://p.sf.net/sfu/intel-dev2devmar > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
