see inline Am 24.03.2011 um 22:54 schrieb John Thornton:
> > > andy pugh wrote: >> On 24 March 2011 07:39, Michael Haberler<[email protected]> wrote: >> >> >>> b) an M61Qx will also load tool offsets for tool<x> as offsets of the >>> current tool (y/n) >>> >> No, that is the job of G43. >> >> >>>> For that reason there will be everytime a tool in the spindle while >>>> shutting down the machine. So when switching on the machine, I home all >>>> axis and then I set the tool using M61 Q5 to tell EMC that tool 5 is in >>>> the spindle. >>>> >> Is that necessary? It seems that loaded tool should be sticky through a >> restart. Anybody got this to work? #5400 is a volatile parameter - if I list it in the .var file the current value is saved on exit but on restart no tool setting is done >> > > Yep, you have to do a TxM6G43 after start up even if the tool is still > in the spindle or turret. I can see where one could argue the sticky > through a restart both ways... if only we had and ini choice for that. How would this be different from adding TxM6G43 in RS274NGC_STARTUP_CODE ? is it because <x> cant be referred to at this point? -mah > > John > > ------------------------------------------------------------------------------ > Enable your software for Intel(R) Active Management Technology to meet the > growing manageability and security demands of your customers. Businesses > are taking advantage of Intel(R) vPro (TM) technology - will your software > be a part of the solution? Download the Intel(R) Manageability Checker > today! http://p.sf.net/sfu/intel-dev2devmar > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
