On 24 March 2011 07:39, Michael Haberler <[email protected]> wrote: > b) an M61Qx will also load tool offsets for tool <x> as offsets of the > current tool (y/n)
No, that is the job of G43. >> For that reason there will be everytime a tool in the spindle while >> shutting down the machine. So when switching on the machine, I home all >> axis and then I set the tool using M61 Q5 to tell EMC that tool 5 is in >> the spindle. Is that necessary? It seems that loaded tool should be sticky through a restart. -- atp "Torque wrenches are for the obedience of fools and the guidance of wise men" ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
