yep that is what I was trying to say LOL... On 10/25/2011 6:14 AM, Michael Haberler wrote: > I found this description > http://igor.chudov.com/manuals/Bridgeport/BOSS/1981-Programming-Manual/Section-5.pdf > page 4 > > it basically says: > > a G0 X Y Z is split into a G0XY and a G0Z traverse > > if Z> currentZ (quill goes up) execute G0Z then G0XY > > if Z< currentZ (quill goes down) execute G0XY and then G0Z > > I'll take that for the example > > -m > > Am 25.10.2011 um 12:09 schrieb John Thornton: > >> Michael, >> >> iirc and I can verify in a bit as my mill uses DX32 which is the same as >> Boss 8 and 10 for the most part according to the manual. >> G0 X2 Y-2 Z0.1 (Z is at some position above 0.1) >> X and Y move to their commanded position Z stays at current position >> until X and Y reach position then Z moves to 0.1" >> do some cutting and note the machine will not execute a G1,2,3 move with >> the spindle off. >> G0 X0 Y0 Z10 (Z at some position below 10) >> Z moves to 10 while X and Y do not move. >> Once Z reaches 10 X and Y move to their commanded position. >> Normally I use M22 to end my programs which means Z to highest position >> and then move X and Y preset position for unloading and loading >> >> John >> >> >> On 10/25/2011 1:51 AM, Michael Haberler wrote: >>> Am 25.10.2011 um 07:13 schrieb brad murry: >>> >>>> For a G0 move, the Z axis is fully retracted before the XY move is >>>> executed in an attempt to avoid collisions. >>> fully retracted: to the Z word of the G0? to some predefined retract >>> position? >>> >>> -m >>> >>>> -Brad Murry >>>>> From: [email protected] >>>>> Date: Tue, 25 Oct 2011 06:36:11 +0200 >>>>> To: [email protected] >>>>> Subject: [Emc-developers] 'BOSS behaviour of a G0' >>>>> >>>>> please explain to me what that does >>>>> >>>>> between the IRC lines I read: 'A G0 x y z' is executed as 'G0 z', then >>>>> 'G0 x y' - right? >>>>> >>>>> >>>>> I'll make it an example in the manual >>>>> >>>>> -m >>> ------------------------------------------------------------------------------ >>> The demand for IT networking professionals continues to grow, and the >>> demand for specialized networking skills is growing even more rapidly. >>> Take a complimentary Learning@Cisco Self-Assessment and learn >>> about Cisco certifications, training, and career opportunities. >>> http://p.sf.net/sfu/cisco-dev2dev >>> _______________________________________________ >>> Emc-developers mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-developers >> ------------------------------------------------------------------------------ >> The demand for IT networking professionals continues to grow, and the >> demand for specialized networking skills is growing even more rapidly. >> Take a complimentary Learning@Cisco Self-Assessment and learn >> about Cisco certifications, training, and career opportunities. >> http://p.sf.net/sfu/cisco-dev2dev >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers > > ------------------------------------------------------------------------------ > The demand for IT networking professionals continues to grow, and the > demand for specialized networking skills is growing even more rapidly. > Take a complimentary Learning@Cisco Self-Assessment and learn > about Cisco certifications, training, and career opportunities. > http://p.sf.net/sfu/cisco-dev2dev > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers
------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
