I agree with Jon, we should follow the RS-274D spec, not the behavior of some particular older controller.
On Oct 25, 2011, at 11:04 , Jon Elson wrote: > John Thornton wrote: >> no, if the next Z position is higher Z moves first if the next Z >> position is lower Z moves last for G0 only. >> > Yes, this makes a lot of sense, especially if you are programming the > machine > from thumbwheel switches like on the first BOSS controls. But, since this > functionality is NOT defined in the RS-274D specs, and can easily be > programmed > in several G0 blocks, I'm not sure we should change behavior. > > Jon > > ------------------------------------------------------------------------------ > The demand for IT networking professionals continues to grow, and the > demand for specialized networking skills is growing even more rapidly. > Take a complimentary Learning@Cisco Self-Assessment and learn > about Cisco certifications, training, and career opportunities. > http://p.sf.net/sfu/cisco-dev2dev > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers -- Sebastian Kuzminsky ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
