EBo wrote: > I had been wondering about dragging the point back through the part -- > causing extra/excessive ware on the tip). I wonder if you do, or could > have, backed the tool out a little from contact, on the reverse. > If you can get the spindle to stop at a known angle, you can then offset the X-Y so the tool can safely be brought up without touching. But, if it is not a servo-controlled spindle, that gets harder.
What you suggest requires stopping at the bottom of the G33.1 cycle, and then manually adjusting the boring head. Not so easy. Only Estop will stop that cycle. Jon ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
