On Monday 18 May 2015 08:21:23 andy pugh wrote: > On 18 May 2015 at 12:25, Gene Heskett <[email protected]> wrote: > > "V-code" is the keyword to search for? I see inserts from several > > makers. But they don't seem to link to a suitable tool to hold the > > insert. > > It is a pity that carbide inserts are hard to search for. The letter > codes are not "hierarchical" in the sense of what will fit a given > holder. > It seems that it would make more sense to go shape - clamping - size - > angle - geometry but they actually go shape - relief - tolerance(!) - > clamping - size. > > https://www.carbidedepot.com/formulas-insert-d.htm > > Try searching eBay for a VCMT holder. They come in handy for > symmetrical profiling. > http://www.ebay.com/itm/181673456148
Thats a good start, what I'd need should fit one of my OXA QC tool holders and I don't think a 12mmx12mm shank will. I looked at what this vendor had, but 12x12 was as small as he went in std square shanks. I have some 5/16" Glanz tools but they hold the more or less std rhombic shaped chips. I'd also need it with the chip mounted straight on, as than one is, but offset to the left such that the max width of the chip was aligned with the left edge of the tool. So after the coffee kicks in, I'll go do the new install, and today I'll at some point be working in the same building Orkin is treating for carpenter ants & termites. With good luck I can have the tool made long before one could get here. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
