Years ago I made a sheave for poly-v to go on my Jet lathe. Used a kennemetal insert. Don't remember which pitch; 0.092 or .185. Both sheaves were aluminum and seem to be holding up well. Never any sign of slippage.
On 05/18/2015 04:29 AM, Gene Heskett wrote: > On Monday 18 May 2015 05:50:40 andy pugh wrote: >> On 18 May 2015 at 10:42, andy pugh <[email protected]> wrote: >>> This data book >>> http://www.contitech.de/pages/produkte/antriebsriemen/antrieb-indust >>> rie/download/TD_Multirib_de_en.pdf >> This also says: "For drives with a ratio >= 3 it is possible to use a >> flat pulley for the larger pulley" which might save some effort. > I saw that. Looks like that would simplicate this a bit. Thats a 1" on > the motor. 5" on the spindle might be just what the Dr. ordered. > > I saved that catalog, much design info in one 73 page tome. > > Thanks Andy. > > Cheers, Gene Heskett ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
