On Tue, 2015-08-11 at 07:59 -0400, Gene Heskett wrote: > On Tuesday 11 August 2015 05:42:28 Valerio Bellizzomi wrote: > > > On Tue, 2015-08-04 at 16:59 +0100, andy pugh wrote: > > > On 4 August 2015 at 16:46, Gene Heskett <[email protected]> wrote: > > > > Is there a way to setp the 'A' so its homed forever, or to coax > > > > axis into displaying a separate button to home A wherever its at? > > > > > > If you give the A-axis a homing sequence number, then specify a > > > homing speed of zero then the A will get tagged as homed along with > > > the rest. Even if it isn't physically there. > > > > > > I have a part-time A axis on my mill, and do exactly that. > > > > hello, > > > > I have set home_search_speed at 0 and also home_latch_speed at 0 but > > it wasn't doing that. it started to work after setting also > > home_sequence = -1 > > then the rotative A axis is homed without moving. > > > My A axis HOME_SEQUENCE is 3 , with all _VEL's at 0.0. And it Just > Works(TM). And it is star'ed in the DRO display last in the homeing > sequence. > > Cheers, Gene Heskett
I had set a home _sequence of 3 and the motor started moving to infinite because there are no home switches. So I searched the forum and found this home_sequence = -1, it does exactly what's required here: the motor should not move. ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
