Hi Jon , yes i'm aware of Machinekit , i do use it , but for industrial i dont think it's got enough horsepower and a more stable base is required , i believe to be long term stable for industrial uses
On 25 December 2015 at 21:14, Jon Elson <el...@pico-systems.com> wrote: > I apologize in advance for stirring up a hornet's nest, but > a branch of the LinuxCNC project has been created called > machinekit. It is mostly aimed at the ARM processors such > as the Beagle Bone. it works > quite well on the $55 Beagle Bone Black computer. You can > attach an LCD screen directly, or log in over the network or > USB from a laptop or other computer. The 200 MHz > microcontrollers built into the CPU chip do a very good job > of step pulse generation, almost as good as a hardware step > generator, and WAY better than software step generation. > > Not sure if this is what you were looking for. > > Jon > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers