>> An example would be an arc in centre-point format. Should the softeare >> refuse to make an impossible arc, or should it modify the arc to be >> possible? >
The arc will not be modified, it is still there, available. We can end up with an approximation, but that can be part of the cycle. If the user wants to force the toolpath he can copy the code on the cycle and paste it on the line after the cycle, forcing the tool to pass through the path. In a milling machine not reaching a determine spot can put in danger the remaining part, as the mill cuts in all its reach (all directions). On a G71 lathe cycle, if you do not go further the starting point (especially in inside machining) nothing is damaged. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
