Moshe,
I believe you should use 3111-1 (USA version of IEC1010-1).
In addition, you might want to look at SEMI S2-93A.
Regards,
Jeff Collins
EMC/Product Safety Engineer
Perkin Elmer Applied Biosystems
[email protected]
______________________________ Reply Separator _________________________________
Subject: UL equivalent to the Machinery Directive?
Author: [email protected] at INTERNET
List-Post: [email protected]
Date: 11/18/98 6:43 PM
Hello everyone,
I have a product which was CE marked for safety according to the machinery
directive. What
would the UL equivalent be?
The product is a semi manual inspection station, used by an operator at a PCB
(bare board)
manufacturer plant. The PC panel is placed on an automatically moving stage
(accessible to
the opeator) and the operator is presented with failure locations.
Would the UL3101 be applicable?
thanks in advance
Moshe
--------------------------------------------
Name: moshe valdman
E-mail: [email protected]
Phone: 972-52-941200
Telefax: 972-3-5496369
List-Post: [email protected]
Date: 18/11/98
Time: 18:43:23
You are most welcome to visit my homepage at:
http://www.geocities.com/CapeCanaveral/5233/
--------------------------------------------
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
