Moshe Hello, The applicable standard is UL3101-1. If you have a robotic system, the requirements in UL1740 may be applied in part or in whole. Check with the NRTL test house which will eventually be Listing the unit.
Regards, > Hello everyone, > > I have a product which was CE marked for safety according to the machinery > directive. What > would the UL equivalent be? > > The product is a semi manual inspection station, used by an operator at a PCB > (bare board) > manufacturer plant. The PC panel is placed on an automatically moving stage > (accessible to > the opeator) and the operator is presented with failure locations. > > Would the UL3101 be applicable? > > thanks in advance > Moshe > -------------------------------------------- > Name: moshe valdman > E-mail: [email protected] > Phone: 972-52-941200 > Telefax: 972-3-5496369 > Date: 18/11/98 > Time: 18:43:23 > You are most welcome to visit my homepage at: > > http://www.geocities.com/CapeCanaveral/5233/ > -------------------------------------------- > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). > PETER S. MERGUERIAN MANAGING DIRECTOR PRODUCT TESTING DIVISION I.T.L. (PRODUCT TESTING) LTD. HACHAROSHET 26, P.O.B. 211 OR YEHUDA 60251, ISRAEL TEL: 972-3-5339022 FAX: 972-3-5339019 E-MAIL: [email protected] Visit our Website: http://www.itl.co.il --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
