Moshe, Actually the Machinery Directive is not a standard, only a directive. You need to find the equivalent UL standard for the applicable performance based standards that were used to satisfy the Machinery Directive. In addition to the directive the DoC should list these. Then look for the correct UL standard.
=================================== Doug Powell, Compliance Engineer Advanced Energy Industries, Inc. 1625 Sharp Point Drive m/s 2018 Fort Collins, Colorado 80525 USA Phone: 970-407-6410 eFax: 970-407-5410 email: [email protected] (new address) =================================== -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, November 18, 1998 7:43 PM To: [email protected] Subject: UL equivalent to the Machinery Directive? Hello everyone, I have a product which was CE marked for safety according to the machinery directive. What would the UL equivalent be? The product is a semi manual inspection station, used by an operator at a PCB (bare board) manufacturer plant. The PC panel is placed on an automatically moving stage (accessible to the opeator) and the operator is presented with failure locations. Would the UL3101 be applicable? thanks in advance Moshe -------------------------------------------- Name: moshe valdman E-mail: [email protected] Phone: 972-52-941200 Telefax: 972-3-5496369 List-Post: [email protected] Date: 18/11/98 Time: 18:43:23 You are most welcome to visit my homepage at: http://www.geocities.com/CapeCanaveral/5233/ -------------------------------------------- --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
