Rich, For ITE, the file number may be used in lieu of control number. I will be glad to provide a memo from UL Labels Department regarding this issue.
This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. PETER S. MERGUERIAN Technical Director I.T.L. (Product Testing) Ltd. 26 Hacharoshet St., POB 211 Or Yehuda 60251, Israel Tel: + 972-(0)3-5339022 Fax: + 972-(0)3-5339019 Mobile: + 972-(0)54-838175 -----Original Message----- From: Rich Nute [mailto:ri...@sdd.hp.com] Sent: Thursday, October 18, 2001 1:09 AM To: rpick...@hypercom.com Cc: chris.maxw...@nettest.com; emc-p...@ieee.org Subject: Re: UL - marking - gentle warning not to extrapolate. Hi Ron: > 1. UL in a circle (the famous UL Listing mark symbol), > 2. The word "LISTED" in capital letters, > 3. The assigned control number*, and > 4. Product identity (e.g., NWGQ, I.T.E., etc.) > > * The assigned control number is a designation that UL assigns to a manufacturer, or manufacuring > location (I have also seen UL file numbers used here, although I'm not sure that UL objects to > that). The file number cannot replace the control number. The control number is always required. The file number can replace the manufacturer's name, or can be used in addition to the manufacturer's name. > So, given the above and IMHO, I would say that just a generic UL Listing mark would neither be > acceptable nor authorized by UL. However, I recommend contacting UL for their official position on > the use of their Listing mark. The generic UL mark (the UL in a circle -- without the other three items) may be used in advertising or on the product carton. I believe UL has some guidelines for this use. Best regards, Rich ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
