Hi Ron:
> 1. UL in a circle (the famous UL Listing mark symbol),
> 2. The word "LISTED" in capital letters,
> 3. The assigned control number*, and
> 4. Product identity (e.g., NWGQ, I.T.E., etc.)
>
> * The assigned control number is a designation that UL assigns to a
> manufacturer, or manufacuring
> location (I have also seen UL file numbers used here, although I'm not sure
> that UL objects to
> that).
The file number cannot replace the control number.
The control number is always required.
The file number can replace the manufacturer's name,
or can be used in addition to the manufacturer's
name.
> So, given the above and IMHO, I would say that just a generic UL Listing
> mark would neither be
> acceptable nor authorized by UL. However, I recommend contacting UL for
> their official position on
> the use of their Listing mark.
The generic UL mark (the UL in a circle -- without the
other three items) may be used in advertising or on
the product carton. I believe UL has some guidelines
for this use.
Best regards,
Rich
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: pstc_ad...@garretson.org
Dave Heald davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.