Other standards with immunity testing above 1GHz: 1. IEC 60533 (1999-11): "Electrical and electronic installations in ships - Electromagnetic compatibility"
2. Some of the ship classification societies (DNV) In both cases it is immunity testing up to 2GHz. 3. ...and of course the MIL-STD 461-series ..... Amund On Thu, 6 Sep 2001 10:15:19 -0500 [email protected] wrote: > > >We have recently purchased an Amplifier Research Model 25SIG4A and we use >an >AR FP2080 probe. We have two antennas for that range, a Schaffner bilog and >an >A. H. Systems horn. > >Other than the upcoming 60601-1-2 for medical equipment, are there any >other upcoming >standards that call out immunity testing over a gig? To my knowledge no >present standard >does. > >Bob Heller >3M Product Safety, 76-1-01 >St. Paul, MN 55107-1208 >Tel: 651- 778-6336 >Fax: 651-778-6252 > >============================================================================== > > > > UMBDENSTOCK@Senso > rmatic.com To: emc- [email protected] > cc: (bcc: Robert E. Heller/US- Corporate/3M/US) > 09/05/2001 10:19 Subject: Power Amplifier for 2 GHz Immunity > AM > Please respond to > UMBDENSTOCK > > > > > > > > >Hello Forum, > >I was wondering what amplifier you are using for the 2 GHz testing >requirement of EN61000-4-3? Any comments regarding "if I had to do it over >again, I would have . . . " relative to your 2 GHz setup? > >Best regards, > >Don Umbdenstock > >Sensormatic > > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old >messages are imported into the new server. > > > > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old messages are imported into the new server. > -- Get your firstname@lastname email for FREE at http://Nameplanet.com/?su ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
