Hi Don, >From my time at a test laboratory, I recall we used an amplifier from Milmega. It was a 55W amplifier. It worked very good. Check out this one http://www.milmega.com/1080.html
For field monitoring, we used the Amplifier Research field probe FP2080. Check out http://www.ar-amps.com/probes.asp Best regards Amund On Wed, 5 Sep 2001 11:19:50 -0400 [email protected] wrote: > >Hello Forum, > >I was wondering what amplifier you are using for the 2 GHz testing >requirement of EN61000-4-3? Any comments regarding "if I had to do it over >again, I would have . . . " relative to your 2 GHz setup? > >Best regards, > >Don Umbdenstock > >Sensormatic > > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old messages are imported into the new server. > -- Get your firstname@lastname email for FREE at http://Nameplanet.com/?su ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
