Bob, EN 301489-1 due in 2003 calls for radiated immunity testing to 2 GHz. EN61000-4-3 also indicates testing to 2 GHz due to the portable phone market.
Best regards, Don Umbdenstock Sensormatic Electronics Corporation > ---------- > From: [email protected][SMTP:[email protected]] > Sent: Thursday, September 06, 2001 11:15 AM > To: [email protected] > Cc: [email protected] > Subject: Re: Power Amplifier for 2 GHz Immunity > > > We have recently purchased an Amplifier Research Model 25SIG4A and we use > an > AR FP2080 probe. We have two antennas for that range, a Schaffner bilog > and > an > A. H. Systems horn. > > Other than the upcoming 60601-1-2 for medical equipment, are there any > other upcoming > standards that call out immunity testing over a gig? To my knowledge no > present standard > does. > > Bob Heller > 3M Product Safety, 76-1-01 > St. Paul, MN 55107-1208 > Tel: 651- 778-6336 > Fax: 651-778-6252 > > ========================================================================== > ==== > > > > > UMBDENSTOCK@Senso > > rmatic.com To: > [email protected] > cc: (bcc: Robert E. > Heller/US-Corporate/3M/US) > 09/05/2001 10:19 Subject: Power Amplifier > for 2 GHz Immunity > AM > > Please respond to > > UMBDENSTOCK > > > > > > > > > > > > Hello Forum, > > I was wondering what amplifier you are using for the 2 GHz testing > requirement of EN61000-4-3? Any comments regarding "if I had to do it > over > again, I would have . . . " relative to your 2 GHz setup? > > Best regards, > > Don Umbdenstock > > Sensormatic > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old > messages are imported into the new server. > > > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
