Hi Andrew,
It appears that you are trying to buy a new amplifier. Have you considered buying a used one? I believe you may be able to find one, maybe even reasonably priced, at an rental equipment company, such as Test Equity, Electro Rent or others (a simple web search should get you most of them). These usally come with a warranty & are calibrated. There are also web-based auction sites, too (ebay come to mind). There might also be a company out with an extra amp laying around and might consider getting rid of it. These are WYSIWYG. Just thought I'd throw my 2 scheckels in. Good luck in your search. Best regards, Ron Pickard [email protected] andrew.p.price@baesyste ms.com To: [email protected] Sent by: cc: owner-emc-pstc@majordom Subject: Pre-amps for EMC Use o.ieee.org 06/28/01 08:58 AM Please respond to andrew.p.price Hi everyone Can anyone help, I am trying to identify a per-amplifier low noise gain 29dB to 36dB to cover frequency range 1GHz to 18GHz for Emission testing. I know HP do a couple but usual problem expensive and I only have a limited budget. Has anyone used a DBS Microwave amplifier type DBS-0119N410? Are they suitable for emission testing? Any help would be gratefully received. Regards Andy Price BAE SYSTEMS Avionics email <[email protected]> ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
