Group,
My understanding is that EN 50091-2:1995 is published in the official
journal and does specifically call out 801-2, 801-3 & 801-4 standards (not
801-5 which it states is in preparation). It does call out EN 61000-4-11:1994
and therefore I believe the intent is to use the 801 series as applicable.
Any other thoughts?
Larry K. Stillings
Compliance Worldwide, Inc.
357 Main Street
Sandown, NH 03873
(603) 887 3903 Fax 887-6445
www.complianceworldwide.com
Privileged/Confidential Information may be contained in this message. If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
