I read in !emc-pstc that [email protected] wrote (in <5814071626 092002/A14159/PLANET/1209D4070D00*@MHS>) about 'MEASURING VSWR WITHOUT A DIRECTIONAL COUPLER' on Thu, 26 Sep 2002:
>Disconnect the "T" from the device >Sweep 2 across the range in same steps, making amplitude measurements >at each step. Record amplitude vs. frequency.(2) Do you disconnect the T entirely, and join the two 20 dB attenuators directly together, or do you leave the T between them, with one port open circuit? -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
