Everybody I need to assess the uncertainty of radiated emission and immunity measurements and thus need to measure the mismatch between components in the systems. The frequency range of interest is 30MHz-1GHz) Is there a way in which I can measure the VSWR of a cable-antenna-receiver/amplifier combination without having to purchase a directional coupler or network analyser? The equipment I have at my disposal is: two power amplifiers (150kHz-30MHz & 80MHz-1GHz), a spectrum analyser with tracking generator (9kHz-2.6GHz), signal generator (150kHz-1GHz), RF power meter (9kHz-1GHz) and a receiver (9kHz-2.6GHz). Any suggestions would be appreciated. Thanks Ian Gordon
_____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"