An excellent paper, "Know when you need to list your product...and when you don't", can be found in Conformity 2002, the annual guide published by Conformity magazine. The paper covers commercial or business statutes, building or fire codes including the NEC, and labor codes. The states of Oregon, Washington, North Carolina and California are discussed as examples.
I did not find the article posted on their web site, unfortunately. It might be worth contacting them for a reprint, if it is available. www.conformity.com Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, March 20, 2002 10:57 AM To: [email protected] Subject: NEC Question Colleagues: The question was asked if all products sold in the US, specifically industrial products, that plugged into the mains had to be UL Listed. The answer was that not necessarily UL Listed, but according to the NEC they did have to be listed, labeled, certified, classified, etc., by a 3rd party. The answer went on to say that this was only applicable if the locality in which the product were to be used, and their AHJ, adhered to the NEC and that not all areas of the country adopted and adhered to the NEC. 1. Do you agree with the above responses? 2. How long has the NEC required products to be listed, labeled, certified, classified, etc.? Your comments and feedback would be appreciated. Thanks in advance, Steve Brody [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
