Steve, To further George's remarks, if you have a product that may be 'custom' or the construction is inconsistent enough to make a general 'listing' by an NRTL unfeasible (more common with industrial products/installations), you may want to consider a 'Field Evaluation' by an NRTL for the product.
John Juhasz GE Interlogix Fiber Options Div. Bohemia, NY -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, March 20, 2002 11:16 AM To: [email protected] Cc: [email protected] Subject: Re: NEC Question Steve, If the products in question are going into U.S. workplaces, they are bound under the OSHA requirements in the U.S. Code of Federal Regulations to be "listed" by an NRTL, regardless of the locale. Approved NRTLs can be found at: http://www.osha-slc.gov/dts/otpca/nrtl/index.html#nrtls Note that not all NRTLs are approved to test to all the standards. You can use any approved to test to the standard covering your products. George sbrody%[email protected] on 03/20/2002 10:57:28 AM Please respond to sbrody%[email protected] To: emc-pstc%[email protected] cc: (bcc: George Alspaugh/Lex/Lexmark) Subject: NEC Question Colleagues: The question was asked if all products sold in the US, specifically industrial products, that plugged into the mains had to be UL Listed. The answer was that not necessarily UL Listed, but according to the NEC they did have to be listed, labeled, certified, classified, etc., by a 3rd party. The answer went on to say that this was only applicable if the locality in which the product were to be used, and their AHJ, adhered to the NEC and that not all areas of the country adopted and adhered to the NEC. 1. Do you agree with the above responses? 2. How long has the NEC required products to be listed, labeled, certified, classified, etc.? Your comments and feedback would be appreciated. Thanks in advance, Steve Brody [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
