Clearly, the NRTLs suffer spools gladly. Wm Flanigan Standards Engineer Ameritherm Inc 39 Main Street Scottsville, NY 14546 [email protected] 1.716.889.9000 1.716.889.4030 (fx)
-----Original Message----- From: Doug McKean [mailto:[email protected]] Sent: Wednesday, March 13, 2002 12:39 PM To: [email protected] Subject: Re: Wire spool labeling requirements Wire can be easily respooled and used by another wire vendor or wiring house that's not recognized. Labeled spools give a higher confidence level then labeled wire. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
