I should emphasize that this applies to equipment build by company A for use by company A only. A label on the equipment stating this is probably a good idea.
Dave Cuthbert From: drcuthbert [mailto:[email protected]] Sent: Wednesday, February 19, 2003 3:28 PM To: 'Joe P Martin'; [email protected] Subject: RE: Custom Units in EU Joe, I looked into this last year. It appears to me that one can import non-certified 61010-type equipment for in-house use. But, it technically must still be able to pass safety, EMC, ESD, surge, and so on. Pretty much like self certification without the final step or two. Dave Cuthbert Micron Technology From: Joe P Martin [mailto:[email protected]] Sent: Wednesday, February 19, 2003 1:49 PM To: [email protected] Subject: Custom Units in EU Greetings, We are planning to manufacture up to 50 units for laboratory use. Each of these units will be one of a kind. These units will be shipped to the EU to our own laboratory and operated by our personnel. If I recall correctly there are exemptions for one of a kind units for EMC, LVD and Machinery Directives. However, I was unable to locate this information in the guidelines to these Directives. Can members of the group provide me with specific information regarding the requirements, if any, for one of a kind units located in the manufacturers facility and operated by employees of the manufacturer in the EU? All responses are appreciated. Regards Joe Martin Applied Biosystems [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
