Joe,
I looked into this last year. It appears to me that one can import
non-certified 61010-type equipment for in-house use. But, it technically must
still be able to pass safety, EMC, ESD, surge, and so on. Pretty much like
self certification without the final step or two.
Dave Cuthbert
Micron Technology
From: Joe P Martin [mailto:[email protected]]
Sent: Wednesday, February 19, 2003 1:49 PM
To: [email protected]
Subject: Custom Units in EU
Greetings,
We are planning to manufacture up to 50 units for laboratory use. Each of
these units will be one of a kind. These units will be shipped to the EU
to our own laboratory and operated by our personnel. If I recall correctly
there are exemptions for one of a kind units for EMC, LVD and Machinery
Directives. However, I was unable to locate this information in the
guidelines to these Directives. Can members of the group provide me with
specific information regarding the requirements, if any, for one of a kind
units located in the manufacturers facility and operated by employees of
the manufacturer in the EU?
All responses are appreciated.
Regards
Joe Martin
Applied Biosystems
[email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
