Is anyone familiar with any requirement that limits the number of ground terminations on a single stud? I heard that the limit is two per stud but I was not able to confirm this with any of the standards we have.
Thanks in advance for your help. Sincerely, Nick Momcilovic Product Safety Quad/Tech, Inc. A Subsidiary of Quad/Graphics Sussex, Wisconsin 414-566-7915 phone 414-566-9576 fax nick.momcilo...@qtiworld.com www.qtiworld.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc