I think you might refer to IEC 60950 para 2.6.4.2 for the connection of the PE. Table 3E will probably be used to govern how many you can have on a stud. Scott
----- Original Message ----- From: Fred Townsend <mailto:f...@dctolight.net> To: Momcilovic, Nick <mailto:nick.momcilo...@qtiworld.com> Cc: emc-p...@majordomo.ieee.org Sent: Wednesday, July 30, 2003 12:47 PM Subject: Re: Number of Terminations on a Ground Stud? Are we talking about electrical circuits or electronic? If we are talking electrical there may be some concerns about current capacity that would limit the number. If we are talking electronic circuits returning all ground circuits to a common ground point is a considered good design practice. Fred Townsend "Momcilovic, Nick" wrote: > Is anyone familiar with any requirement that limits the number of ground > terminations on a single stud? I heard that the limit is two per stud but I > was not able to confirm this with any of the standards we have. > > Thanks in advance for your help. > > Sincerely, > > Nick Momcilovic > Product Safety > > Quad/Tech, Inc. > A Subsidiary of Quad/Graphics > > Sussex, Wisconsin > 414-566-7915 phone > 414-566-9576 fax > nick.momcilo...@qtiworld.com > www.qtiworld.com > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: emc_p...@symbol.com > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc