Joe, Briefly speaking the test plan shall detail goals and strategies to achieve them. - goals: list of countries, standards & regulations you are intending to meet (regional, national, international for safety, EMC, environmental, etc.), - strategies: path you are taking to meet your goals (describing approval strategy and timeframe). If this plan needs to be presented at the meeting the best choice would be have a few slides outlining requirements and approval strategy otherwise stick with text document, checklist and schedule.
Leszek M. Langiewicz Homologation/Global Compliance Sr. Compliance Engineer (Safety/EMC) ENCAD, Inc. - A Kodak Company 6059 Cornerstone Ct West, San Diego, CA 92121 USA * (858) 677-5155 * (858) 229-9217 * (858) 677-5166 H www.encad.com * [email protected] -----Original Message----- From: Joe P Martin [mailto:[email protected]] Sent: Tuesday, October 21, 2003 1:27 PM To: [email protected] Subject: Regulatory Plan Greetings, I have been asked to put together a regulatory plan for one of our company's products. I am trying to get as many opinions as possible as to the elements of such a plan. Please share with me your elements of such a plan and, if possible, send me a copy of a plan to use as an example. Your assistance is greatly appreciated. Regards Joe Martin Applied Biosystems [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
