The first aspect of a regulatory plan would be to get a planned list of all
the countries that they wish to sell the product into. After that the next
stewp would be to determine what standards are applicable and need to be
tested to. Next would be to determine what approvals if any are necessary
and a plan of action to obtain them. After the standards and approvals
questions are answered the necessary markings would have to be determined
and planned for.
Sandy Mazzola
BAE Systems Inc
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, October 22, 2003 8:26 AM
To: [email protected]; [email protected]
Subject: RE: Regulatory Plan
I like to keep it simple, so I list the standards that will be applied and
the licenses/marks that will be obtained. I found that no one outside the
compliance group really cares what is in the document as long as the list of
project deliverables has a check mark by this one. Yep, its been delivered.
Richard Woods
Sensormatic Electronics
Tyco International
From: Joe P Martin [mailto:[email protected]]
Sent: Tuesday, October 21, 2003 4:27 PM
To: [email protected]
Subject: Regulatory Plan
Greetings,
I have been asked to put together a regulatory plan for one of our
company's products. I am trying to get as many opinions as possible as to
the elements of such a plan. Please share with me your elements of such a
plan and, if possible, send me a copy of a plan to use as an example.
Your assistance is greatly appreciated.
Regards
Joe Martin
Applied Biosystems
[email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
