I don't know what type of product you are trying to put a plan together for but I would highly recommend you get a CB certification and report for the products especially if you are planning to sell in the Far East. The CB certification will help you with Singapore, Korea, China approvals and limit the amount of retesting................
From: Mazzola, Santo [mailto:[email protected]] Sent: Wednesday, October 22, 2003 10:41 AM To: [email protected]; [email protected] Subject: RE: Regulatory Plan The first aspect of a regulatory plan would be to get a planned list of all the countries that they wish to sell the product into. After that the next stewp would be to determine what standards are applicable and need to be tested to. Next would be to determine what approvals if any are necessary and a plan of action to obtain them. After the standards and approvals questions are answered the necessary markings would have to be determined and planned for. Sandy Mazzola BAE Systems Inc From: [email protected] [mailto:[email protected]] Sent: Wednesday, October 22, 2003 8:26 AM To: [email protected]; [email protected] Subject: RE: Regulatory Plan I like to keep it simple, so I list the standards that will be applied and the licenses/marks that will be obtained. I found that no one outside the compliance group really cares what is in the document as long as the list of project deliverables has a check mark by this one. Yep, its been delivered. Richard Woods Sensormatic Electronics Tyco International From: Joe P Martin [mailto:[email protected]] Sent: Tuesday, October 21, 2003 4:27 PM To: [email protected] Subject: Regulatory Plan Greetings, I have been asked to put together a regulatory plan for one of our company's products. I am trying to get as many opinions as possible as to the elements of such a plan. Please share with me your elements of such a plan and, if possible, send me a copy of a plan to use as an example. Your assistance is greatly appreciated. Regards Joe Martin Applied Biosystems [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
