I read in !emc-pstc that Gordon,Ian <[email protected]> wrote (in <E1BA0362B28ED211A1E80008C71EA3060207000D@EXC_EAS01>) about 'EN/IEC 61326 Harmonized Standard for Laboratory Equipment' on Fri, 23 Apr 2004: >Whilst neither of the amendments referred to below affect the sort of >equipment we produce or test it is "interesting" and not uncommon that there >is a delay between the publication of the IEC version and the BS EN version. >I have always applied the BS EN version. >Am I correct in following this rationale?
For compliance with the EMC or RTTE Directives, yes. >The latest BS EN version is equivalent to IEC61326: 1997 including >amendments 1 and 2. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
