Hello John, Addition of Annex E and F are new, there are no other differences.
********* Annex E (normative) Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems. Annex F (normative) Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. ************ Best regards Helge Knudsen Test & Approval Niros Telecommunication Hirsemarken 5 DK-3520 Farum Tel +45 44 34 22 51 Fax +45 44 99 28 08 email [email protected] Fra: John Barnes [mailto:[email protected]] Sendt: 22. april 2004 17:41 Til: [email protected] Emne: EN/IEC 61326 Harmonized Standard for Laboratory Equipment EMC/PSTC'ers, What are the differences (if any) between IEC 61326:2002 and IEC 61326:1997 +A1:1998 +A2:2000? The title page on the 2002 edition shows "First edition 2002-02 Electrical equipment for measurement, control and laboratory use - EMC requirements". The December 11, 2003 issue (C271) of the Official Journal of the European Union (OJ) lists EN 61326:1997 +A1:1998 +A2:2001 as a Harmonized Standard under the EMC Directive. The references show that this EN standard is identical to IEC 61326:1997 +A1:1998 +A2:2000. We bought IEC 61326, and received the 2002 version, which on page 7 says "This standard cancels and replaces the first edition of IEC 61326-1 published in 1997, its amendment 1 (1998) and its amendment 2 (2000) and constitutes a technical revision. The text of this standard is based on the following documents: FDIS Report on Voting 85A/345/FDIS 65A/348/RVD" Thanks! John Barnes KS4GL, PE, NCE, ESDC Eng, SM IEEE dBi Corporation http://www.dbicorporation.com/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
