EMC/PSTC'ers,
What are the differences (if any) between IEC 61326:2002 and IEC
61326:1997 +A1:1998 +A2:2000? The title page on the 2002 edition shows
"First edition 2002-02 Electrical equipment for measurement, control
and laboratory use - EMC requirements".
The December 11, 2003 issue (C271) of the Official Journal of the
European Union (OJ) lists EN 61326:1997 +A1:1998 +A2:2001 as a
Harmonized Standard under the EMC Directive. The references show that
this EN standard is identical to IEC 61326:1997 +A1:1998 +A2:2000.
We bought IEC 61326, and received the 2002 version, which on page 7 says
"This standard cancels and replaces the first edition of IEC
61326-1 published in 1997, its amendment 1 (1998) and its
amendment 2 (2000) and constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on Voting
85A/345/FDIS 65A/348/RVD"
Thanks!
John Barnes KS4GL, PE, NCE, ESDC Eng, SM IEEE
dBi Corporation
http://www.dbicorporation.com/
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
