David Heald <[email protected]> wrote (in <[email protected]>) about 'ESD help for I/O ports', on Wed, 24 Aug 2005:
>See section 7.1.3 of 61000-4-2 for guidance on how to bleed off the >charge between impulses. I think this is a very significant point. Nowhere does the OP say which standard is being applied. ESD testing of Class II products requires a special arrangement, as detailed in IEC/EN 61000-4-2 if that is the standard being applied. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
