Are you zapping to I/Opins? Best Regards Charles Grasso Senior Compliance Engineer Echostar Communications Corp. Tel: 303-706-5467 Fax: 303-799-6222 Cell: 303-204-2974 Pager/Short Message: [email protected] Email: [email protected]; Email Alternate: [email protected]
From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, August 22, 2005 1:23 PM To: [email protected]; [email protected] Subject: RE: ESD help for I/O ports Peter, Can you tell me what the failure mode is? Dave Cuthbert Micron Technology From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, August 22, 2005 11:20 AM To: [email protected] Subject: ESD help for I/O ports Hello group, I am involved in design of a small printer and one of the problems that I am facing is the ESD failure on my I/O ports. Both USB and Parallel. The problem is contact discharge and at 4KV. I pass 3KV but when I go to 4, it fails. Can anyone give me some design guideline or recommendation that I need to follow? I greatly appreciate it. Thanks Peter This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
