Cl. 7.1 of the 5th edition of UL94: 1997 reads: 7.1.2 A material classed HB shall (also see 7.1.4): a) Not have a burning rate exceeding 40 mm per minute over a 75 mm span for specimens having a thickness of 3.0 - 13 mm, or b) Not have a burning rate exceeding 75 mm per minute over a 75 mm for specimens having a thickness less than 3.0 mm, or c) Cease to burn before the 100 mm reference mark. See 7.5.1 and 7.5.9.
John Radomski Schneider Automation Inc. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
