In message <AE34E7FDD9D01F42994924D4C4EB6A4F0A014131@flbocexu05>, dated Mon, 1 May 2006, "GOEDDERZ, JIM" <[email protected]> writes
>On the presumption that this is the same as UL94, doesn't the logic say >less than 40mm/min. or not reach the 100 mm mark? That is what 'or' is normally taken to mean. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immensely. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
