In message <ofb13987d0.65391125-on862572ec.006b3352-862572ec.006c0...@apcc.com>, dated Thu, 31 May 2007, ted.eck...@apcc.com writes:
>I have an old IEC document from 1982 with an IEC symbol. (It is IEC >297-2 to be exact.) The symbol has a square border with the "C" >reaching close to the sides of the square. A capital "E" is centered >inside of the "C" and a lower case "i" is interwoven through the three >horizontal bar of the "E". Indeed, but it is not, and never was, any sort of 'approval' mark. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk There are benefits from being irrational - just ask the square root of 2. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________