I have an old IEC document from 1982 with an IEC symbol. (It is IEC 297-2 to be exact.) The symbol has a square border with the "C" reaching close to the sides of the square. A capital "E" is centered inside of the "C" and a lower case "i" is interwoven through the three horizontal bar of the "E".
A similar version is available on a copy of a 1981 IEC Bulletin. The copy on my standard uses straight lines for the "I" and "E" and is less stylized. http://www.iec.ch/about/history/pdf_his ory/75th%20anniversary%20IEC%20Bulletin.pdf Ted Eckert American Power Conversion/MGE http://www.apc.com/ The items contained in this e-mail reflect the personal opinions of the writer and are only provided for the assistance of the reader. The writer is not speaking in an official capacity for APC-MGE or Schneider Electric. The speaker does not represent APC-MGE's or Schneider Electric's official position on any matter. "Brian O'Connell" <oconnellb@tamura corp.com> To Sent by: <[email protected]> [email protected] cc Subject 05/24/2007 11:56 'IEC' symbol ?? AM Good People, Is there such a thing as an 'IEC' symbol (no, not the 417 stuff). I am looking at a component that has a mark similar to the CSA logo, but the 'inner' characters of the logo are 'I' and 'E'. The project engineer claims that is an approval symbol. Does this mark mean anything ? luck, Brian - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
