Hello Rich, Everyone says NIS and 4 to 6 weeks. Also looked at probes, but all over 2% accuracy.
Any suggestions? thanks, Brian -----Original Message----- From: Richard Nute [mailto:[email protected]] Sent: Wednesday, October 05, 2011 12:43 PM To: [email protected] Cc: [email protected] Subject: RE: [PSES] hi-pot tester Hi Brian: > Could not find an AR model having better than 2% voltage > accuracy spec - > require at least 1.5%. Suggest you use an external meter with a HV probe. Have you considered sources such as Exphil or TekNet or Continental Resources or Advanced Test Equipment Rentals? Best regards, Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
