----- Original Message ----- From: "Cortland Richmond" <[email protected]>
> 1) Use less than 9 KHz for a clock. 1MHz generator is standard in such systems. AM and FM receivers are a kind of basic electronic in my opinion so I'd like to allow for taking frequency characteristics of 465kHz and 10.7MHz filters, and see AM and FM demodulators working. > 2) Note that the equipment is not complete (a breadboard isn't, after all) > and so not subject to the standards for completed equipment. It is used by end user and there is nothing planned to be added to it so why it is not complete? Typical breadboard isn't complete as it is destined to be installed in some case. > 3) Use a SELV power limited supply. Right. Regards Piotr Galka - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
