Slightly out of date but this subset web of AeA is good for EuP ref: http://tinyurl.com/82tqsb
Market Transformation Programme http://www.mtprog.com/cms/ AEA http://www.aeat.co.uk/cms/ From: [email protected] [mailto:[email protected]] On Behalf Of Brian O'Connell Sent: 13 January 2009 21:22 To: [email protected] Subject: RE: First EUP Regulation implementation regarding standby power So the document called "COMMISSION REGULATION (EC) No 1275/2008 of 17 December 2008" is not the EuP Directive but references it, and is intended to revise the EuP Directive ? And the document called "DIRECTIVE 2005/32/EC OF THE EUROPEAN PARLIMENT AND OF THE COUNCIL" is the EuP, and contains the 'Annex V' to which the former is refering to ? From: [email protected] [mailto:[email protected]]On Behalf Of John Woodgate Sent: Tuesday, January 13, 2009 11:49 AM To: [email protected] Subject: Re: First EUP Regulation implementation regarding standby power In message <[email protected] lobal.pv t>, dated Tue, 13 Jan 2009, Jim Hulbert <[email protected]> writes: >Article 4 refers to the "management system set out in Annex V". I don't see any problem. Article 4 says: The procedure for assessing conformity referred to in Article 8(2) of Directive 2005/32/EC shall be the internal design control system set out in Annex IV to Directive 2005/32/EC or the management system set out in Annex V to Directive 2005/32/EC. Annex V is in the cited Directive. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
