1. IEC/EN60065 is not adequate for the discussed scope - and the harmonized standard list of the RTTE directive references article 2 of the LVD.
2. UL60065 makes additional standards normative for batteries and charger power sources. 3. You are correct that chargers embedded in another product are not scoped by 60335-2-29 - I should have been more specific, as I must apply it because some of my employers products have a vehicle power adapter, and the scope of 335-2-29 applies to this. R/S, Brian > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of John > Woodgate > Sent: Thursday, July 09, 2009 9:03 AM > To: [email protected] > Subject: Re: How to determine if battery-operated product is > safe or not > > In message <[email protected]>, > dated Thu, 9 > Jul 2009, Brian O'Connell <[email protected]> writes: > > >I do investigate our chargers to IEC60950-1 and/or IEC60335-2-29. > > IEC/EN 60335-2-29 is specific to chargers and is not suitable for > complete products with another function even if a charging > circuit is > included. IEC/EN 60065 is the correct standard to apply. > -- > OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk > Things can always get better. But that's not the only option. > John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering > Society emc-pstc discussion list. To post a message to the > list, send your e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be > posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
