At a basic level, do an NSA for the chamber and compare to the OATS NSA to develop a correction factor for the two.
________________________________ From: "Grasso, Charles" <[email protected]> To: Jim Hulbert <[email protected]>; "[email protected]" <[email protected]> Sent: Wednesday, December 21, 2011 4:29 PM Subject: RE: Semi-Anechoic Chamber Question - Correction Factor Professor Leferink published a nice paper that proposed a different correction factor for a SAC to a FAC. I tried to track it down but had no luck. Best Regards Charles Grasso Compliance Engineer Echostar Communications (w) 303-706-5467 (c) 303-204-2974 (t) [email protected] (e) [email protected] (e2) [email protected] From:[email protected] [mailto:[email protected]] On Behalf Of Jim Hulbert Sent: Monday, December 19, 2011 2:27 PM To: [email protected] Subject: RE: Semi-Anechoic Chamber Question Thank you everyone for the helpful feedback. The consensus is clearly: Save my back and leave the absorber and ferrite tiles in place. Compare radiated emissions measurements in the chamber to those on the OATS (several suggested a comb generator for this purpose). Assign an adjustment factor to the chamber measurements to correlate as closely as possible to the OATS measurements (6dB has been suggested as a reasonable factor, although I need to confirm this through my own measurements). Jim - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
